Other Functions of the SFC-VTEC

• SFC Mode - During "Realtime Mode," if you find a RPM range that you would like to modify the settings for without keeping your eye on the tachometer, a short hold on the MODE switch will send you to "Setting Mode."
  
• VTEC Mode - During "Realtime Mode," if you find a RPM point at which you would like to set the hi-cam switchover point to, a short hold on the MODE switch will send you to "Setting Mode."

* - These features are meant for the user to jump to "Setting Mode," in order to adjust them later - Please do not adjust the settings while driving, as it is dangerous.

 

(use during VTEC mode)

During track races, the user can set-up the SFC-VTEC to soundan alarm at shift-points, rev-limits, or at the hi-cam switchoverpoints.

When the fuel delivery goes beyond the capability of theSFC-mode, then the display will show OF. Lowering the fueldelivery at approximately that RPM range is recommended.

During "Realtime Mode," pressing the MODE switch formore than 2 seconds will turn off the unit - with the exceptionof the illuminated switches.

Pressing the MODE switch again will turn on the unit andrestore back to the last used function.