| SFC-VTEC Main MenuSFC-VTEC Wiring for H2 Cars Compatible Cars (H2) | Chassis Type | Engine Model | Year Model | ECU Location | Accord | CD6 | H22A | 9/93 ~ | Foot area of Passenger-side seat | Prelude | BB1, BB4 | H22A | 9/91 ~ 10/96 | Foot area of Passenger-side seat | DelSol | EG1, EG2 | D15B, B16A | 3/92 ~ | Left foot area of Passenger-side seat | Integra | DA6, DA8 | B16A | 10/91 ~ 5/93 | Foot area of Passenger-side seat | Integra (MT) | DC2, DB8 | B18C | 6/93 ~ 8/95 | Left foot area of Passenger-side seat | Civic | EG4, EG6 | D15B, B16A | 9/91 ~ 9/95 | Left foot area of Passenger-side seat | Civic Ferio | EG8, EG9 | D15B, B16A | 9/91 ~ 9/95 | Left foot area of Passenger-side seat | Civic Coupe | EJ1 | B16A | 10/92 ~ 9/95 | Left foot area of Passenger-side seat | Accord Wagon | CE1, CF2 | F22B, H22A | 3/94 ~ | Foot area of Passenger-side seat | Instructions: - Turn off the Engine, and remove the (-) negative ground from your battery
- Remove all covers, etc., and locate your ECU
- Following the diagram below, wire your unit accordingly.
- Use pliers to securely fasten the electrotaps.
- Use proper crimping tools to fasten the terminals securely.
- If you see wire that originally had a ring-shaped connector, please make sure that it gets properly grounded.
- On some models, there will be wires that are not used, or left disconnected. Please use electrical tape to terminate properly.
- Once the wiring is complete, set the dipswitches to the following configuration, and install the unit in your desired location.
- Re-connect your battery terminal, and confirm operation of the device.
|