Other Functions

"Quick Hold" function

A "Short Hold" of the Mode switch during "Realtime" mode will immediately put you into "Setup" mode at that RPM point. Though not recommended to adjust fuel delivery during driving, this function will allow you to push the button when you sense unusual response from the engine. This way, you know what RPM point you need to adjust.

"Auto Return" function

If you leave your SFC until idle for 5 seconds during "Setup" mode, you will automatically be returned to "Realtime" mode.

"Memory Map Reset" function

During "Setup" mode, pressing the UP and DOWN button simultaneously and holding for 2 seconds will reset the Memory Location that is currently selected. (refer to Factory Mapping Settings below)

"Power Off" function (they call this a function!? - Kaz)

While in "Realtime" mode, pressing the Mode switch for more than 2 seconds will turn the unit off.